A carpeted basement can be a wonderful escape from the usual hustle and bustle of the rest of the house. Carpet and padding naturally promote sound reduction and require less time and money to level than hard surface flooring. However, homeowners must not forget that of all the spaces in a house, the basement is the most prone to flooding. If you’ve carpeted your basement, the last thing you want is to deal with water damage.
Sadly, it still happens. Our Davis County flood restoration experts have seen quite a few wet basement carpets in their day, so if you wake up to this kind of Hâ‚‚O horror, consider the following tips on how to restore your basement to its former (dry) glory.
Why is My Carpet Wet?
Identifying the reason for the wet carpet in the basement is crucial for determining what steps are needed to resolve the issue. Popular reasons include:
- Leaks in your house foundation
- Floods seeping through walls or basement doors and windows
- Burst pipes
- Damaged or improperly fitted washing machines or other utilities
- A malfunctioning sump-pump
- Outdoor drainage issues not taking water away from the house
When these issues occur, and your basement carpet soaks up the intrusive water, you must fix the problem and dry your carpet as soon as possible. If left unattended, soaked carpets can lead to further issues such as:
- Mold growth and potential health problems
- Damage or weakening of your basement floor or building foundations
- Lingering unpleasant odors
Unfortunately, carpet drying is not a quick process and often takes a couple of days. Although inconvenient, the more work you put into drying your carpet as soon as possible, the fewer issues you’ll have later. Ignoring your wet carpet will only cause more problems you don’t want.
Tips for Drying Basement Carpet
Safety first
Before you even step foot in your basement, you should ensure that you take precautionary measures. Shut off the electricity to the space (or the whole house, if it is not isolated) to prevent any potential harm caused by shorts or exposed wires/electronics. If a burst pipe causes flooding, turn off the water supply and try fixing the damage in a common space. This will prevent potentially fatal accidents and make your working area safe.
Get the necessary tools
You will need a few tools to help you in the carpet drying process. Some of these you can find in your kitchen or utility cupboards, but others you will need to buy or rent from your local hardware store.
Essential tools you need include:
- Towels
- Mop and bucket
- Fans or dehumidifiers
- A wet/dry vacuum
- A carpet cleaner
- Disinfectant spray/shampoo
Close off the room to prevent further water damage and to keep family members or pets from walking over the wet carpet. Once you have handled the cause of the flooding and acquired all the tools you will need, you can start drying your carpet.
Clear the carpet area
First off, you will want to make sure the area is clear of any objects or debris. Remove any furniture or other items from the carpet and throw away anything too damaged or waterlogged to return. You don’t want to dry off your carpet only to soak it again when you put everything back.
Remove the standing water
Ensure that the floor is dry by getting any water out of the basement. If your basement is prone to flooding, you will likely have a sump pump installed that can pump out the worst of the water. If not, you can achieve this by using a wet/dry vacuum, which draws water up from the carpet’s fibers. Mops and towels around the edges will prevent the water from seeping into walls and causing further damage to your foundation.
If there’s so much water that a DIY job appears out of the question, you can contact Utah cleanup specialists to help you address the situation.
Dry the room
You can start drying out the room when the water is gone. If your basement was warm while flooded, the water might have evaporated, creating moisture in the air and walls.
During the day, open all windows and doors if it is safe to do so. This will allow any humidity to leave and let the air dry the room. At night, run a dehumidifier to draw out further any moisture that may have soaked into the walls and other furnishings.
Dry the carpet
If possible, lift the carpet and either take it outside or hang it up using chairs, ladders, or other furniture. This is important as better airflow will help dry the carpet thoroughly, exposing the under sheeting or subfloor. Run the wet/dry vacuum over it again to ensure all water is gone, and once it is dry to the touch, you can put it back in its original place.
Check for signs of damage or mold
Give your basement a thorough examination for any water damage or mold signs. You will need to handle these before you finish preparing the room because if left unchecked, further issues will arise in the future. If you find any places where exposed wood or plaster is weak or warped, you may need to seek a professional to help you repair them.
Clean and disinfect the carpet
Even with the carpet dry once more and back where it should be, your job isn’t quite finished. There may still be some dirt and other things in your carpet fibers from the water. After laying it back on the basement floor, you can use a carpet cleaner or some carpet shampoo to give the carpet a thorough clean. Using some disinfectant will also help kill off any lingering germs or mold spores, making the carpet safe for use again.
A flooded basement is not the end of the world. While it can seem daunting, drying out a carpet is not as difficult as you might think. Time, patience, a handful of tools, and a little hard work should get your basement carpet clean and dry in no time.
