Got mold? At this very moment, that mold is spreading into places that are impossible to reach, and putting your health at risk. Don’t waste another minute. You need the help of an expert that works fast to remove toxic and destructive mold from your home or business.

That’s where we come in. The Disaster Company has been eradicating mold for Utah homeowners and businesses since 2012, and we know this work inside and out. We’re licensed, insured, on call 24/7, and at most Wasatch Front properties within 60 minutes.

Call us now for mold removal and remediation in Utah.

google logo
4.7
104 Reviews
We work with all insurance companies
Before and after mold removal and cleanup in Utah
IICRC certified
HomeAdvisor - Top Rated Badge
HomeAdvisor - 5 Years Screened & Approved Badge
60 minute response to most locations in Utah
  • Mold Inspection and Testing
  • Air Quality and Surface Sampling
  • Moisture Source Identification
  • Containment Setup and Negative Air
  • HEPA Air Filtration
  • Toxic and Black Mold Removal and Disposal
  • Antimicrobial Treatment
  • Structural Drying and Dehumidification
  • Drywall Repair or Replacement
  • Insulation Removal and Replacement
  • Crawlspace and Attic Remediation
  • Post-Remediation Verification
Call 24/7 - 801-741-0000

Mold isn’t just a surface issue—it indicates a moisture problem that must be corrected. Safe remediation requires containment, negative air pressure, and HEPA filtration to protect both the structure and occupants while we remove the mold at its source.

— Josh Handley, Mitigation Manager & Senior Restoration Technician. Certified Mold Remediation Specialist / IICRC AMRT, Water Damage Restoration Technician (WRT), Advanced Structural Drying (ASD)
Mold cleanup job - mold removal by professional in protective gear

Mold Removal and Remediation in Utah

Mold is a slow, filthy wrecking ball. More often than not, it starts doing damage before you even notice it’s there. It creeps behind walls, tears into drywall and wood, and can leave your property unsafe while putting everyone’s health on the line. Wait too long, or trust the wrong crew, and a small patch can turn into a serious, expensive mess.

We’ve seen it. Time and time again, our team of trusted experts have been called in to handle the ramifications of incomplete mold removal, recurring growth, and lasting damage that could have been prevented.

That’s why Utah homeowners trust us: The Disaster Company that gets the job done right the first time. We’ve been treating mold since 1995. Our IICRC-certified, licensed specialists bring professional-grade equipment, trained eyes, and a proven process to every job. We don’t just treat what you can see. We find what you can’t.

Call 24/7 - 801-741-0000

What to Do Right Now if You Find Mold

Before our team arrives, there are steps you can take to protect yourself and prevent mold from spreading further.

1. Call Us.  The sooner we assess the situation, the better the outcome.

2. Don’t disturb the mold. Scrubbing, scraping, or vacuuming mold can release thousands of spores into the air and spread contamination to unaffected areas throughout your home. Leave it alone until a professional can assess it.

3. Limit airflow through the area. Avoid running fans or your HVAC system near affected areas. Air movement carries spores to other rooms and can make the problem significantly harder to contain.

4. Identify and stop moisture sources. If a visible leak or wet area is present, address the moisture source if you can do so safely. Mold cannot be permanently resolved without eliminating the moisture feeding it.

5. Don’t seal or paint over it. Covering mold with paint or caulk is not remediation. It traps the problem behind the surface while growth continues underneath.

6. Document everything. Take photos and videos of visible mold, water stains, and any damaged materials. This documentation matters for your insurance claim.

7. Avoid bleach as your solution. Household bleach does not effectively kill mold on porous materials and can create the impression of success while active growth continues beneath the surface.

Not sure what your next move should be? Call us now. Our team has guided hundreds of Utah homeowners and businesses through mold situations, and we’re happy to walk you through it step by step.

Mold growth on plywood in a home in Utah

Why Hire a Professional for Mold Removal

When mold appears, it’s common to think you can scrub it away or throw a little bleach on it, but this type of thinking is what causes the problem to multiply and spread by activating spores that move through the air.

The cost of DIY mold removal can be devastating. Incomplete remediation almost always leads to recurrence and when mold returns, it returns with a vengeance. In some cases, improper removal can also affect your insurance claim or void coverage for future damage. Getting it done right the first time is safer and far less costly than tackling the same problem twice.

Our professional remediation technicians are trained to assess what’s visible and what’s at risk. We identify the moisture source, map the full extent of contamination, and determine which materials can be cleaned versus which need to come out entirely. We use containment protocols, HEPA filtration, and antimicrobial treatments that operate at a completely different level than anything available at a hardware store. We also verify the results through post-remediation testing when warranted.

When it comes to mold, you don’t want to risk angering the problem with some DIY quick fix. Call The Disaster Company and let us handle it right.

Call 24/7 - 801-741-0000

Our Mold Remediation Process

When you call The Disaster Company, you’re getting a structured, proven process carried out by specialists who’ve handled mold remediation for decades. Here’s what to expect.

1. Inspection and Assessment

We start with a thorough inspection and interview about past water events, leaks, and any symptoms you’ve noticed in the space. We then perform a visual assessment and create a moisture map using calibrated meters. When needed, Infrared imaging is used to locate hidden damp areas. When evidence suggests active or unknown growth, we collect air and surface samples for analysis at an accredited laboratory. At the end of our inspection, you receive a clear written report that summarizes findings, photos, readings, and next-step recommendations.

2. Containment Setup

Before any removal begins, we establish containment around the affected area to prevent spores from spreading to unaffected parts of your property. Negative air pressure is set up and maintained throughout the project. Technicians wear proper PPE at all times.

3. HEPA Air Filtration

Commercial-grade HEPA air scrubbers run continuously throughout the project, capturing airborne spores and maintaining air quality in and around the work area. This protects everyone on site and the rest of your property while remediation is underway.

4. Mold Removal and Material Disposal

Unsalvageable porous materials, including affected drywall, insulation, baseboards, and other building components that cannot be effectively cleaned, are removed and disposed of safely. Remaining hard and semi-porous surfaces are HEPA vacuumed and treated with appropriate antimicrobial solutions.

5. Drying and Dehumidification

Moisture is the root cause of every mold problem. We use controlled drying and commercial dehumidification to bring all affected materials within target moisture ranges. Conditions are documented daily, leaving nothing to chance. We don’t guess; we measure.

6. Post-Remediation Verification and Restoration

Once remediation is complete, we perform post-work verification to confirm the area is clean, dry, and clear. We then coordinate repairs and rebuild, including drywall, insulation, trim, paint, and more, so you have one accountable team from start to finish. Our goal is to return your property to its pre-damage condition, or even better than before.

Why Choose The Disaster Company for Mold Remediation

We’re not just any disaster company: we’re The Disaster Company you can trust for fast and effective mold removal and remediation. Here’s what sets us apart from the rest.

Photo of mold damage on walls and ceiling in home.

Certified and Experience Specialists

Our team of seasoned experts have seen it all and know exactly how to respond. Our technicians are IICRC-certified and have been serving Utah homeowners and businesses since 1995. That’s nearly three decades of hands-on experience with mold, water, flood, and fire damage across the Wasatch Front.

Licensed, Insured, and Fully Compliant

Mold remediation is regulated work. We are fully licensed and insured, and our methods comply with all local and federal regulations governing mold remediation and hazardous materials. When you trust The Disaster Company with your mold removal, you can rest assured knowing that everything is being handled legally, responsibly, and safely.

Insurance Support and Claims Help

Dealing with insurance claims after mold damage can be a stressful and complicated process, so we’ll do it for you. We work directly with your insurance company, providing damage assessments, cost estimates, and direct billing support to take as much of that burden off your plate as possible. For covered claims, we offer zero-down, direct insurance billing so you can get back to your life.

Safe and Thorough Methods

We use cleaning and treatment products that are effective without being unnecessarily harsh on your home or the environment. Our containment protocols, HEPA filtration systems, and antimicrobial treatments follow IICRC industry-standard guidelines — protecting your family, your property, and the people doing the work.

We Work With All Insurance Companies

Get a Free Inspection
Insurance logo statefarm
Insurance logo allstate
Insurance logo progressive
Insurance logo liberty
Insurance logo farmers
Insurance logo nationwide
Insurance logo geico
Insurance logo western
Insurance logo travelers
Insurance logo bear river
Insurance logo american family
Insurance logo metlife

Frequently Asked Questions

How much does mold removal cost in Utah?

Costs depend on square footage, material types, the moisture source, and how easy the area is to reach. In Utah, pricing typically mirrors national averages for similar homes and construction.

  • Small, localized areas under 10 square feet: $600 to $1,500 and 1 to 3 workdays.
  • Larger projects involving multiple rooms, extensive attic or crawlspace work, or complex drying: $1,500 to $12,000 or more and 3 to 7 workdays.

How long does mold remediation take?

Timeline depends on the size of the affected area, how many materials need to be removed, and how long the drying process takes. Small, localized jobs can be completed in 1 to 3 days. Larger projects involving multiple rooms, attic or crawlspace work, or significant structural drying typically take 3 to 7 days for remediation, with additional time if repairs or rebuild work are needed. We’ll give you a realistic timeline during your initial assessment.

Why should I hire a professional instead of cleaning it myself?

Household cleaning products, including bleach, do not effectively kill mold on porous materials, and disturbing mold without proper containment can release thousands of spores into your air and spread contamination to unaffected areas. Professionals use containment protocols, HEPA filtration, commercial-grade antimicrobials, and moisture detection equipment that simply aren’t available to the average homeowner. More importantly, professionals identify and address the moisture source. Without that step, mold will return regardless of how thoroughly the surface is cleaned.

Is mold covered by homeowners insurnace?

It depends on the cause. Mold that results from a sudden, covered water event, like a burst pipe or appliance failure, is often covered. Mold stemming from long-term moisture problems or deferred maintenance typically is not. We work directly with insurance companies and can help you navigate the claims process and understand what your policy covers.

What are the health risks of mold exposure?

Mold exposure can cause a range of symptoms depending on the mold type, exposure level, and individual sensitivity. Common symptoms include nasal congestion, coughing, throat irritation, eye irritation, and skin reactions. People with asthma, allergies, or compromised immune systems may experience more severe reactions. Some mold species produce mycotoxins that can cause serious health effects with prolonged exposure. If anyone in your household is experiencing symptoms you suspect may be mold-related, prompt remediation is important.

Can mold come back after remediation?

If the moisture source is properly identified and eliminated, and remediation is performed thoroughly, mold should not return to treated areas. The key word is “properly.” Incomplete remediation or unresolved moisture problems are the most common reasons mold recurs. Our process includes moisture mapping, controlled drying to verified target levels, and post-remediation verification to confirm the job is done right the first time.

Additional Mold Resources

Mold is a serious threat to your property and the people in it, but it is manageable when addressed early and handled correctly. To learn more about mold in your home, health risks, and what the research says, these resources are a good place to start:

EPA: A Brief Guide to Mold, Moisture and Your Home

CDC: Mold and Your Health

Utah Asthma Program: Mold Resources

Anytime, day or night, 24/7, we are on call and ready to respond to help you

Get a Free Inspection